Printer Setup, Software & Drivers at 123.hp.com/setup

123.hp.com/setup site made it easy to download software/drivers for hp printers. Enter your model or series name and 123.hp.com/setup will get you the right software.

Process to Download Software/Drivers for Hp Printers

  1. Add a USB-connected printers to Windows.

  2. Turn on the printers, and then connect the USB cable to the printers and to the computer port.

  3. Go to the HP page: 123.hp.com/setup and from the main section.

  4. Visit HP Customer Support Software and Driver Downloads.

  5. Enter your printers name in the search box you should be able to find your printer name on your printers.

  6. Click “Enter”.

  7. You might have several different driver options to choose from review them all and download.

  8. The most important driver options will be placed at the top of the list.

  9. To install the HP Universal Print Driver.

  10. If you can print, the driver installed successfully.

  11. In Windows, search for and open Add a printer or scanner.

  12. Click Add a printer or scanner, and then wait for Windows to locate available printers.

  13. If your printers is found, click it, and then click Add device to complete the driver installation.

  14. Select the HP Universal Print Driver from the available driver options.

  15. In the Choose a printer port window, select Use an existing port, select USB, and then click Next.

  16. Follow the instructions to install the driver for your printer model.

Network Issues

    • Print a network test page, if you end up receiving network issues. Do not use wrong credentials for your network.

    • Disconnect the device from the existing connection and try selecting an alternate connection.

    • Printer offline- Do not allow your printer to go offline. In case if you receive an offline error message, use the print and scan doctor tool to run a quick scan. Click on the Fix Printing and Fix scanning option to run the tool.

    • Manual reset- Disconnect the cables connected. Switch of the device and connect it back after a while. If performing an automatic reset is your choice, check if the compatible settings are available.

    • Check the hardware connected- Do not use the wrong port to connect the hardware. It’s always recommended using good quality cables to use with HP.

    • Scan your device- Use the compatible HP printer scan tools and its better to remove the external software installed on your Printer.

Leave a Reply